Environmental

Environmental Industry

Worker pumping out a septic tank

Pumping or vacuum tanks are the primary equipment needed in any environmental or wastewater cleanup operation, but for large operations or remote jobs, FRAC tanks are helpful for storing wastewater temporarily and then transporting it for later disposal. Depending on your specific operation, Geneva Equipment will help you select the FRAC tank that will deliver the best result in the most cost effective way.

Application: Septic Pumping

Best for the Job: Flat Top Frac Tank Storage Specs: 500 BBL or 21,000 gallons Description Convenient, portable wastewater storage next to your septic pumping operation. Pump directly from your vacuum truck into the frac tank and move to the next operation. Since the Geneva Equipment flat top frac tanks hold 21,000 gallons, you can transfer 4 to 7 vacuum tank loads to the frac tank for later disposal. Geneva Equipment’s tanks are epoxy lined so they won’t deteriorate with the chemical composition of wastewater.

Application: Temporary chemical or fuel storage

Best for the Job: Flat Top Frac Tank Storage Specs: 500 BBL or 21,000 gallons Description Convenient, portable chemical or fuel storage next to your cleaning operation at refineries. Park the frac tanks onsite as you clean out fuel tanks/crude oil tanks. Use the frac tanks for temporary storage during the operation, then transport for later disposal.

Application: Water remediation

Best for the Job: Flat Top Frac Tank Storage Specs: 500 BBL or 21,000 gallons Description Most economical portable storage for basic water remediation projects. When you are retrieving dirty water or water that has been contaminated by fuel or chemicals, pump the dirty water into the frac tank for temporary storage onsite. When your clean-up operation is finished, frac tanks are easily transported to another site for disposal or filtration of the dirty/contaminated water.

Application: Pond and Sludge Dewatering

Best for the Job: Wier Tank Storage Specs:  18,100 gallons Description Weir tanks are effective for heavy duty environmental jobs such as pond and sludge dewatering. Weir tanks are sectioned off into different compartments. A compartment may include a settling tank, sometimes called a sand trap, to allow the heavier material or sludge to separate from the liquids and sink to the bottom. Some have a “V” shaped floor to drain stored liquids with ease. Tanks can then be transported easily to another location for disposal and/or filtration.

Application: Environmental Clean-Up -- General

Best for the Job: Open Top Frac Tank Storage Specs: 500 BBL or 21,000 gallons Description Open Top Frac Tanks allow the easiest access to check fluid levels in the tank. They also have 24″ manways to allow the easiest access to clean tanks after the job is finished. Open top tanks can be used to store dirty water during an environmental cleanup.

Application: Water Remediation Sensitive Environment

Best for the Job: Double Wall Frac Tanks Storage Specs:  16,000 gallons Description Double Wall frac tanks feature a built-in secondary containment wall, which is a must when containing contaminated liquids near environmentally sensitive areas. The double wall ensures an extra layer of protection against leaking. This is especially important when you need to capture and store contaminated liquids near fresh water sources and other areas with strict regulatory requirements.